It offers the possibility of anchoring at different distances without compromising the total strength of the personal anchor tether. The individual resistance of each ring is 22 kN, the same as that of the webbing as a whole.
The tether has cinchless technology (patented by Fixe). It is a constructive system that allows the multi chain strap to be attached to the two tying points of the harness (waist and legs) without strangling the assembly and improving comfort. The personal anchor tether can also be placed with the conventional girth hitch system. In addition, a colour code serves to differentiate, from the rest of the set, the ring that must be tied to the harness and the ring at the end of the chain.
Taking care of every last detail, the side seams of the rings that make up the personal tether are finished off to prevent them from getting caught when carrying out maneuvers in anchoring, with carabiners, etc.
A variable distance personal tether, with a length of 60 cm, composed of a chain of sewn strap loops. Made of polyamide and HMPE (ultra-high molecular weight polyethylene. The HMPE component provides exceptional lightness and resistance to the whole piece.
Its versatility allows it to be used in multiple mountain activities, such as multi-pitch climbing or mountaineering. With this personal anchor tether we can comfortably anchor ourselves, adjusting the length; mount the braking device to carry out a rappel at the most convenient point of the kit; or anchor ourselves to the wall at certain times during the climb, for example.
Length: 60 cm
Cinchless technology: (patented by Fixe)
Resistance: 22 kN (individual resistance of the ring and the anchor tether together)
Weight: 62 g
Certification: EN566:2017 and UIAA 104:2018
Made in: Sant Quirze de Besora (Barcelona-Pyrenees)
The packaging is made entirely of biodegradable material (kraft paper). The base of the dyes applied is of vegetable origin. All packaging must be recycled as paper.